Pelco MPT115DT Instrukcja Użytkownika Pobierz pdf

®

1.0 WARNINGS

Prior to installation and use of this product, the follow-

ing WARNINGS should be observed.

1. Installation and servicing should only be done by

Qualified Service Personnel and conform to all

Local codes.

2. Unless the unit is specifically marked as a NEMA

Type 3, 3R, 3S, 4, 4X, 6, or 6P enclosure, it is de-

signed for indoor use only and it must not be in-

stalled where exposed to rain and moisture.

3. Use only installation methods and materials ca-

pable of supporting four (4) times the maximum

specified load.

4. Only use replacement parts recommended by

Pelco.

Please thoroughly familiarize yourself with the infor-

mation in this manual prior to installation and opera-

tion.

Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 • USA • www.pelco.com

(800) 289-9100 or (1-559) 292-1981 • FAX (800) 289-9150 or (1-559) 292-3827

International customers call (1-559) 292-1981 or FAX (1-559) 348-1120

MPT24DT, MPT115DT, and

MPT220DT Series

Pan/Tilt Controls

Installation/Operation Manual

C520M Rev B (6/92)

2.0 SCOPE

The information contained within this manual covers

the installation and operation of the MPT24DT,

MPT115DT, and MPT220DT Series Pan/Tilt Controls.

3.0 DESCRIPTION

The MPT24DT and MPT115DT Series controls are

designed to provide control for Pelco 24 VAC, 120 VAC,

and 230 VAC pan/tilts. Pan/tilt movement is controlled

by an eight position joystick (up, down, left, right and

simultaneous combinations of pan/tilt functions when

move diagonally).

In addition to manual control and continuous auto scan

operations, the MPTA24DT and MPTA115DT offer the

revolutionary new random scan feature available only

from Pelco. Random scan is a significant advance in

CCTV security/surveillance protection that makes con-

tinuous duty auto scan operations virtually obsolete.

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - C520M Rev B (6/92)

®1.0 WARNINGSPrior to installation and use of this product, the follow-ing WARNINGS should be observed.1. Installation and servicing should only be

Strona 2

2 Pelco Manual C520M Rev B (6/92)Random scan is an effective deterrent to would-be in-truders because it follows no predictable pattern. Thescan direc

Strona 3

Pelco Manual C520M Rev B (6/92) 34.0 INSTALLATION4.1 CONNECTOR ASSEMBLYInstallation and/or testing will require you to assemblethe connector parts

Strona 4 - Figure 2. Wiring Diagram

4 Pelco Manual C520M Rev B (6/92)Figure 2. Wiring DiagramFRONT VIEWCONTROL14-PINPLUG9-PINPLUGFRONT VIEW135678913567814P/T COMM

Strona 5

Pelco Manual C520M Rev B (6/92) 55.0 OPERATION AND SYSTEM TEST5.1 MANUAL OPERATION TESTAfter installing the interconnecting cable between thepan/til

Strona 6

6 Pelco Manual C520M Rev B (6/92)6.0 MAINTENANCEUnder normal operating conditions and usage, mainte-nance of this equipment is not necessary. However

Strona 7

Pelco Manual C520M Rev B (6/92) 7Figure 3. Dimension DrawingGENERALConstruction:Cover Steel, black polyester powder coatChassis Steel, zinc platedPan

Strona 8 - INFORMATION

8 Pelco Manual C520M Rev B (6/92)8.0 WARRANTY AND RETURNINFORMATIONWARRANTYPelco will repair or replace, without charge, any merchandise proveddefecti